How to replace a roof?

Damaged roof

Of all major home repairs, installing new roofing is the most important. After all, it keeps water out of the building. If your roof is damaged it can be danger to you and your family. When you sense that your roof is nearing the end of its useful life you should contact with the specialist like NICO Roofing Company Naperville IL to get help with this problem.

How the roof replacement looks like?

Of course if you need to replace your roof, you will probably need a help of professional. But sometimes it is good to know how this thing works. If you want to find out how replace a roof, here are some of the steps that you should know about:

Step 1: Removing Damaged Shingles

Find the damaged area of shingles and determine how many new shingles you will need and the extent of the damage underneath. Removing all the shingles on the roof is usually done with a large hayfork , pry-bar, or rake-sized scraper used for removing shingles. You need to get your tool then get under and carefully pry up shingles, separate the adhesive and reveal the nails of the shingles underneath.

Step 2: Loosen the exposed nails

Slide your flat pry-bar under the shingles around the damaged portion. Work around the nail, pulling it up.

Step 3: Loosen and remove the damaged shingles

Loosen the adhesive underneath the tabs of the damaged shingle, then pull them free and discard. If the shingles are severely damaged, do not try to salvage them.

Step 4: Install the new shingle

Place a new shingle in the same position as the shingle you removed. If the shingles are backed with adhesive strip, remove the covering and push them into place, then nail them to secure them. Most shingles have pre-cut holes for nails, usually three per shingle. Follow the directions of the shingles that you purchase. Good luck!

Leave a Reply

Your email address will not be published. Required fields are marked *